top of page

Zoë FIT UK Group

Public·6 members

CR-10 V3 Firmware and Software Guide - Everything You Need to Know

How to Update the Firmware for Your CR-10 V3 3D Printer

The CR-10 V3 is a powerful and robust 3D printer from Creality that offers a large printing volume, a direct drive extruder, a ceramic coated glass bed, a filament runout sensor, and many other features. However, like any other 3D printer, it also needs regular firmware updates to ensure optimal performance and compatibility with new features and upgrades.

cr-10 v3 firmware download

Download File:

Firmware is the software that controls the hardware of your 3D printer. It tells your printer how to move, heat, extrude, and communicate with your computer. Updating your firmware can improve your print quality, fix bugs, add new functions, and enhance your user experience.

Some of the benefits of updating the firmware for your CR-10 V3 are:

  • Supporting new accessories such as BL Touch auto bed leveling sensor, laser engraver, touch screen, etc.

  • Improving the stability and accuracy of your prints

  • Reducing noise and vibration

  • Adding new features such as thermal runaway protection, power loss recovery, filament change pause, etc.

  • Fixing known issues such as clogging, jamming, extrusion inconsistency, etc.

In this article, we will show you how to update the firmware for your CR-10 V3 3D printer in a few simple steps. We will also provide some troubleshooting tips in case you encounter any problems during the process.

cr-10 v3 firmware update

cr-10 v3 firmware upgrade

cr-10 v3 firmware install

cr-10 v3 firmware guide

cr-10 v3 firmware tutorial

cr-10 v3 firmware th3d

cr-10 v3 firmware marlin

cr-10 v3 firmware bl touch

cr-10 v3 firmware creality

cr-10 v3 firmware official

cr-10 v3 firmware latest

cr-10 v3 firmware free

cr-10 v3 firmware zip

cr-10 v3 firmware file

cr-10 v3 firmware sd card

cr-10 v3 firmware visual studio code

cr-10 v3 firmware video

cr-10 v3 firmware troubleshooting

cr-10 v3 firmware reset

cr-10 v3 firmware settings

cr-10 v3 firmware options

cr-10 v3 firmware features

cr-10 v3 firmware benefits

cr-10 v3 firmware comparison

cr-10 v3 firmware review

cr-10 v3 firmware reddit

cr-10 v3 firmware forum

cr-10 v3 firmware support

cr-10 v3 firmware help

cr-10 v3 firmware tips

How to Update the Firmware for the CR-10 V3

To update the firmware of your CR-10 V3 3D printer, you will need the following:

  • A computer with Windows or Mac OS

  • A USB cable

  • The Creality slicer software (you can download it from [here](^1^))

  • The latest firmware package for your CR-10 V3 (you can download it from [here](^2^))

Once you have everything ready, you can follow these steps:

Step 1: Download the Firmware Package from Creality's Website

The first step is to download the firmware package from Creality's official website. You can find it under the Firmware & Files Download section. Choose your printer model (CR-10 V3) and then select either Mainboard Firmware or BL Touch Firmware depending on whether you have installed a BL Touch sensor on your printer or not. You will get a ZIP file that contains a .hex file and some instructions.

Step 2: Open the Creality Slicer Software and Connect Your Printer

The next step is to open the Creality slicer software on your computer. This is a free software that allows you to slice your 3D models and send them to your printer. It also has a function to flash your firmware. To use it, you need to connect your printer to your computer using a USB cable. Make sure your printer is turned on and recognized by your computer.

Step 3: Set the Serial Port and Baudrate

Once you have connected your printer, you need to set the serial port and baudrate in the slicer software. These are settings that allow your computer and printer to communicate with each other. To do this, go to Machine > Machine Settings in the menu bar. A window will pop up where you can select your serial port (usually COM followed by a number) and your baudrate (usually 115200). Click OK to save your settings.

Step 4: Flash the Firmware

The final step is to flash the firmware to your printer. To do this, go to Machine > Install Custom Firmware in the menu bar. A window will pop up where you can browse and select the .hex file that you downloaded from Creality's website. Click Open and then OK to start the flashing process. You will see a progress bar and a message that says "Firmware update successful" when it is done.

Step 5: Restart Your Printer and Check the Firmware Version

After flashing the firmware, you need to restart your printer and check the firmware version. To do this, turn off your printer and disconnect the USB cable. Then turn on your printer and go to Info > Version on the LCD screen. You should see the new firmware version displayed. If not, you may need to repeat the flashing process or contact Creality's customer service for assistance.

How to Troubleshoot Common Issues with the Firmware Update

Sometimes, you may encounter some issues or errors when updating the firmware for your CR-10 V3 3D printer. Here are some common problems and solutions that may help you:

Problem: The slicer software does not recognize my printer or serial port

Solution: This may be caused by a faulty USB cable, a wrong driver, or a conflicting software. Try using a different USB cable, installing the CH340 driver from Creality's website, or closing any other software that may interfere with the communication between your computer and printer.

Problem: The flashing process fails or gets stuck

Solution: This may be caused by a corrupted firmware file, a power outage, or a loose connection. Try downloading the firmware file again, using a stable power source, or checking the USB cable and the mainboard connection.

Problem: The printer does not work properly after updating the firmware

Solution: This may be caused by a wrong firmware version, a mismatched configuration, or a faulty hardware. Try downloading the correct firmware version for your printer model and accessories, resetting the EEPROM settings, or checking the wiring and components of your printer.


Updating the firmware for your CR-10 V3 3D printer is an easy and beneficial process that can improve your printing experience and performance. By following the steps in this article, you can update your firmware in no time and enjoy the new features and functions of your printer.

However, if you encounter any problems or have any questions about the firmware update, you can always contact Creality's customer service or visit their online community for more support and guidance. They are always ready to help you with any issues or inquiries that you may have.

We hope that this article has been helpful and informative for you. If you want to learn more about the CR-10 V3 3D printer and its accessories, you can check out our website for more articles, reviews, tips, and tutorials. Happy printing!


Here are some frequently asked questions and answers about the CR-10 V3 firmware update:

Q: How often should I update the firmware for my CR-10 V3?

A: There is no fixed rule on how often you should update your firmware. It depends on your personal preference and needs. However, we recommend that you check Creality's website regularly for any new firmware releases or updates that may suit your printer model and accessories.

Q: Can I use other slicer software to flash the firmware?

A: Yes, you can use other slicer software such as Cura, PrusaSlicer, Simplify3D, etc. to flash the firmware. However, you need to make sure that they support custom firmware installation and that they have the correct settings for your printer model and accessories.

Q: Can I revert back to the previous firmware version if I don't like the new one?

A: Yes, you can revert back to the previous firmware version if you don't like the new one. However, you need to have a backup of the old firmware file and follow the same steps as flashing the new one.

Q: What are some of the new features that are added in the latest firmware version?

A: Some of the new features that are added in the latest firmware version are:

  • Support for BL Touch V3.1 sensor

  • Support for laser engraver module

  • Support for touch screen module

  • Improved thermal runaway protection

  • Improved power loss recovery

  • Improved filament change pause

Q: How can I check if my firmware update was successful?

A: You can check if your firmware update was successful by going to Info > Version on the LCD screen of your printer. You should see the new firmware version displayed. You can also test some of the new features or functions that are added or improved in the new firmware version.


Welcome to the group! You can connect with other members, ge...
bottom of page